BeastBOX: Leviathan BB-14

 

It's been awhile since I've posted a BeastBOX review, but that doesn't mean that I haven't added a few new releases to the collection. I understand the appeal of a robotic animal transforming into a box/cube may not float everyone's boat, but I love this series and with each release they keep getting better and better.

Today we are taking a look at Leviathan, a (blue) whale. Up until this release the aquatic animals have just been OK. Leviathan however takes it to the next level. The packaging as seen above is now the standard fare. The box features a window that shows a portion of the figure, along with large artwork of the character. A character specific logo appears in the top right corner, while the code number and name appear in the bottom right portion. The 52Toys logo is on the lower left corner.

The back of the packaging features more artwork of the character, along with a diagram of some of it's features. In this case it shows a diagram of the included small aquatic creatures/weapons and a small figure of Jojo (ape). The left side of the box gives credit to the designer of the character. Most of the recent releases have featured a large sticker that appears to be covering (wrong?) information. You can see this sticker was applied upside down. Whoops!

Images from the left and right sides of the box include some nice artwork of the character as well as drawings of the beast mode and box mode.

From the rear view you can see the two small gray turbines on each side of the tail. Just behind the cockpit are two yellow air tanks.

I'm amazed at what the designers are able to do with these figures and Leviathan is no different. This looks like a robotic whale, complete with curves and fins. The fact that this folds up into a box/cube is amazing.

the included small blue figure of Jojo (one of the earlier BeastBOX figures) can fit inside the cockpit. Even though there are two chairs, Jojo must be position in the middle in order for him to stay in place.

The included accessories include this small orange/gray whale torpedo and blue/gray manta ray. Both of these accessories can be attached to the underside of Leviathan.

Some of these BeastBOX figures have a tricky transformation required to get all of the pieces folded up and neatly tucked away to form the box mode. Leviathan however has a pretty straight forward transformation that didn't give me any fits. Everything folded together with ease and made a convincing box/cube. All of the accessories can be nearly stored inside the cockpit.

Leviathan comes with a translucent Box Charger crate. This allows the figure to be stored in box mode. The Charger can also be connected to additional Box Chargers, or stacked on top of each other. In my display case I've started to store my less favorite characters inside their Chargers and make a display of sorts, effectively using them as risers.

This is by far one of my favorite BeastBOX figures yet...and that says a lot since just about everyone I've opened thus far are so much fun. 52Toys has a winner on their hands with this series.

Hot Wheels: Guardians of the Galaxy Vol. 2 Milano (HW Screen Time 02/10)

 

The Screen Time subseries of Hot Wheels are some of my favorites. Being a long time Marvel fan this small die-cast Milano starship from a few years ago is right up my alley.

When it comes to Hot Wheels I generally don't care for anything other than cars and trucks, but the Milano is a cool looking ship and the detail put into this is fantastic. The added blue translucent stand is a great addition...all non-traditional vehicles should come with a stand like this. 

These days it seems like a lot of the Hot Wheels based on pop culture are in the collector aimed lines with the higher price point so it is refreshing to see something like this in the main line.

Transformers 3rd Party: FansProject - Tailclub

Sometime around 2013 (or was it 2014) FansProject unveiled their wholly original design which just happened to tickle the fancy old Transformer collectors like myself. The Retro-Future series featured a ice age themed combiner group that when merged together formed Glacialord. It's as if these new figures could have been on the shelves of your local Toys 'R Us store back in the 80's.

I've been sitting on these figures for entirely too long. It's time to "let them breathe" so join me if you will as we take an indepth look at the "Glaciabots".

Next up is Tailclub, a Doedicurus. If you aren't familiar with that animal, don't worry as I didn't know what that was either. Apparently its an extinct relative of the Armadillo family. Before we get to the figure, let's take a closer look at the packaging. If you're a long time reader of the blog then you'll know I'm a fan of packaging. While I don't save toy packaging like I once did, there is just too much love put into this particular packaging for me to gloss over or to toss in the trash.

For starters you'll notice that the box has all sorts of "defects" worked into the design. From the crushed corner, worn edges, old tape or even water damage, these boxes are meant to look like they've seen their fair share of love over the years. The front of the box features a small window where you can see a portion of the toy. If you look through the window carefully you'll notice the figure is sitting inside a white block of styrofoam. Screw planet Earth, we've got styrofoam trays again!! A image of the blocky character is featured prominently on the right side. 

On the back of the box we have a smaller image of Tailclub and how he forms the left leg/foot of Glacialord. More of the weathered look of the box can be seen on the back as well. While not pictured, the robot and alternate forms are shown on each side of the box.

The block of styrofoam carefully cradles the figure, weapon and mini-figure...which is actually Tailclub according to the included instructions...more on that later. Inside the little baggie is a G1 like instruction manual and a partially used sticker sheet. This is an odd touch, but I see how it fits into the whole package. I was a little frustrated however that the instructions don't include a sticker layout. While there are only a few stickers for you to actually apply, it would've been nice to have confirmation of where the stickers went. Thankfully it's pretty easy to find the pre-applied stickers and match up the others.

After opening Tailclub I had a better idea of what I was getting into. Tailclub is more of the same...which is a good thing! The feel of the plastic is smooth and you can tell it's of a good quality. While the paint apps may be limited, they look great. Tailclub really is a brick...but that's a good thing...well that is if you are a fan of the original 80's Transformers. No ball joints here. Limited poseability, check. I do like how Glacialord's foot plate is integrated into the animal design. Accessories that are self contained on a action figure is a huge plus in my book.

The mini-figure comes sealed on a small blister card and is labeled "Tailclub". I'm assuming this means the rhinoceros is a non-sentient robot and controlled by Tailclub? Doesn't really matter to me as I like the gimmick...reminds me of some of the later Japanese exclusive G1 Transformers.

Creatively there is a small door on the footplate hat slides open to allow Razorspike to be inserted for "beast rider" mode...call it whatever you will.

I'm not exactly sure what you'd call these mini-figures. They aren't quite Headmasters. They aren't quite Brainmasters. They aren't quite Breastmasters either...however they share similarities (sort of) of all 3. Tailclub's legs fold forward forming a small cube. Then the mini-figure is inserted into the cavity of the newly transformed robot.

Tailclub's head is now the head of the larger robot. If the small, square head looks familiar it's because it's designed after many of the original G1 Transformer combiners. Small and undersized for the body, yet still awesome. The toy stands about 4.5 inches tall. Robot mode features very limited articulation. The arms move up and down and that is about it.

The beast head attaches to the tail piece to create even a larger weapon. The foot piece doubles as a shield. Overall Razorspike has a great looking form and would blend in well with any G1 combiner collection.

As shown on the back of the box, Tailclub forms the right leg/foot of the combined Glacialord. The robot's chest rotates forward to reveal a small square shaped peg that allows the leg/foot to be connected to Glacialord's torso, Tusker.

Tailclub is now the third of the lot that I opened and he's just as great as the previous two. It's a shame that these toys ultimately didn't sell that well for FansProject as they are great. It was refreshing to see a third party company release something original in a sea of "reimagined" established characters. As of this post, many of the "Glaciabots" can be purchased at online retailers for a fraction of their original prices.

GLACIALORD: 

Fangro

Razorspike